H type 3tiers 4tiers layer chicken egg cage battery cagesfor chicken farm
Chicken Layer Poultry Farms Battery Cages For laying hens
Details of the Layer chicken cage :
The Poultry chicken layer cage net adopts Q235 cold drawn steel wire to be welded and then hot dip galvanized, which has long corrosion resistance and long service life. The bottom net is welded with a wire diameter of 2.35mm, and the bottom of the cage is equipped with a 5mm reinforcing steel wire, which not only enhances the elasticity of the bottom net, but also has elasticity, which not only reduces the fatigue of the chicken, but also greatly reduces the breaking rate. The push-pull cage door with the lock is easy to open, does not run the chicken and can also prevent the chicken from feeding out of the trough when feeding.
Cages System with Automatic Feeder :
Chicken cage automatic feeding system is carried out by driving, and the feed in the tower is conveyed to the driving hopper of the chicken house through the transverse conveying device. The vehicle runs back and forth before and after the journey, and the screed distributes the feed evenly in the trough, and the feed component can be adjusted. This process works entirely in accordance with pre-set automatic control procedures. A trough with an inner edge. The chicken does not take out the feed when it is eaten, saving the cost of feeding. Both ends of each feed line are fed by a return feeder. Regularly clean up the long-term residual feed in the trough to prevent the deterioration and waste of the feed.