Advantages of Egg Tray Production Line :
First, the drum drive and cold press of our molding machine use servo motor plus precision reducer to complete precise position control. This control method does not have the problem that the position of the drum cannot be accurately positioned due to mechanical wear. Thereby greatly improving the service life of the mold. And it is not easy to block the net, which improves the utilization rate of the machine.
Second, Egg Tray Production Line use sub-transmission design. That is, the three parts of transfer, drum and cold press are completed by three servo motors. The three motors are organically linked through the PLC and can be turned on either individually or in combination. Not only is the boot operation simple, but the transfer speed can be greatly improved due to the separate transfer control, which greatly improves the single machine output.
Third, Equipment for the production of trays has a high degree of automation and a high safety factor. The machine will automatically stop once the machine fails.
Fourth, the design has a cold pressing mechanism. Equipment for the production of trays is squeezed by the cold die during the suction process, the moisture in the product is squeezed out, and the vacuum is sucked away while being extruded. The water content of products produced by machines without cold pressing is reduced by 6%-8% or more. Reduce the load on the drying room and save energy. (The profit of the egg tray industry depends most on the energy consumption. The smaller the energy consumption per unit of output, the greater the profit.)
5. The molding machine has a good brushing and brushing function. The product is neat around, without burrs, and reduces the time of brushing. Increased uptime and increased single-day production.